DRY LAND™ DELIQUESCENT SKID MOUNTED AIR DRYER SYSTEM, 450 CFM @ 100 PSIG OR 575 CFM @ 150 PSIG
Contact Us for Additional Information
Write a Review
Write a Review
DRY LAND™ DELIQUESCENT SKID MOUNTED AIR DRYER SYSTEM, 450 CFM @ 100 PSIG OR 575 CFM @ 150 PSIG
- Part Number:
- DLAD-450-575
- Weight:
- 801.00 LBS
GASKET, HANDWAY, 4" x 6"
888-7000-00006PB
NIPPLE, TBE, GALV, 2' x CLOSED
888-3029-10999PB
DRY LAND™ DELIQUESCENT SKID MOUNTED AIR DRYER SYSTEM, INCLUDES POLYARMOR® LINED DELI-VESSEL, AFTER COOLER, COALESCING PRE FILTER, AIR TEMP GAUGE & AIR MOTOR OIL DISCHARGE TRAP, 450 CFM @ 100 PSIG OR 575 CFM @ 150 PSIG, SHIPS EMPTY - DESICCANT PURCHASED SEPARATELY
This product is compatible with the following OEM manufacturers
| OEM Manufacturer | Part # |
|---|---|
| FORECAST SALES / PIRATE BRAND | ADPB-400 |
| FORECAST SALES / PIRATE BRAND | 888-1310-041PB |
| SCHMIDT MANUFACTURING / U.S. FILTER / AXXIOM MANUFACTURING | 1310-041 |
| SCHMIDT MANUFACTURING / U.S. FILTER / AXXIOM MANUFACTURING | ADS 400 |
Forecast Sales is not affiliated with nor is it endorsed by the above manufacturer(s). The product depicted above is not produced or authorized by the above manufacturer(s), with the exception of Forecast Sales/Pirate Brand, RPB Safety, and Bullard.
BECAUSE DRY AIR IS CRUCIAL FOR ABRASIVE BLASTING
The Pirate Brand® Dry Land™ line of air dryers is an ideal solution for mobile blasting contractors. Wet compressed air clogs blasting pots and compromises the quality of the blasted substrate by putting moisture back on the surface. The moisture then flashes to rust, necessitating costly re-work.
FEATURES:
- Polyarmor® lined desiccant tank
- 5 year / 10 year limited warranty (see warranty documentation for details)
- After cooler (cools incoming air before reaching desiccant)
- Coalescing pre-filter
- Air temperature gauge (great for troubleshooting)
- Filter/regulator/lubricator package for air motor
- No electricity required
- Sight glass (for checking desiccant level)
- Air motor oil discharge trap
- Skid mounted
- A.S.M.E. section VIII division 1 / C.R.N. for all provinces
| Specifications | |
| Inlet Size | 2" NPT |
| Outlet Size | 2" NPT |
| Weight Empty | 801 lb (364 kg) |
| Width | 49" (125 cm) |
| Depth | 26.5" (68 cm) |
| Height | 76" (194 cm) |
| Desiccant Capacity | 300 lb (135 kg) |
| Max. Pressure | 200 PSI |
| Air Motor Lubricant | ATF |
| Maximim CFM (Cubic Feet Per Minute) | |||||
| 80 PSI | 100 PSI | 125 PSI | 150 PSI | 175 PSI | 200 PSI |
| 330 | 450 | 500 | 575 | 660 | 750 |
HOW IT WORKS
Pirate Brand® Dry Land™ Single Tower, Deliquescent, Air Dryers are a skid mounted system which includes an after cooler, a coalescing filter, and a single tower dryer filled with desiccant tablets. Warm compressed air enters the aftercooler where it is cooled to a 10°F to 15°F (5.6°C to 8.3°C) approach to ambient air temperature, water is condensed out during this cooling process. The saturated air and liquid water pass through a coalescing filter where any oil contaminants from the compressor are removed and then proceed to the inlet of the dryer tank. The water and any solid particles present are separated by gravity and fall to the bottom of the dryer tank. The air moves up through the desiccant tablets which absorb the moisture from the air dropping the relative humidity before it flows through the dryer outlet. The tablets dissolve gradually as they absorb the moisture. The dissolved desiccant and water falls to the bottom of the vessel. The dryer must be drained periodically to remove the accumulated solution. A manual ball valve is installed for this purpose.