DRY LAND™ AFTER COOLER SKID MOUNTED SYSTEM, INCLUDES AFTERCOOLER, MOISTURE SEPARATOR, COALESCING FILTER ON A POWDER COATED SKID, 450 CFM @ 100 PSIG OR 575 CFM @ 150 PSIG
Contact Us for Additional Information
Write a Review
Write a Review
DRY LAND™ AFTER COOLER SKID MOUNTED SYSTEM, INCLUDES AFTERCOOLER, MOISTURE SEPARATOR, COALESCING FILTER ON A POWDER COATED SKID, 450 CFM @ 100 PSIG OR 575 CFM @ 150 PSIG
- Part Number:
- DLAC-450-575
- Weight:
- 297.00 LBS
NIPPLE, TBE, GALV, 1-1/2' x CLOSED
888-3029-10899PB
NIPPLE, TBE, GALV, 2' x CLOSED
888-3029-10999PB
DRY LAND™ AFTER COOLER SKID MOUNTED SYSTEM, INCLUDES AFTERCOOLER, MOISTURE SEPARATOR, COALESCING FILTER ON A POWDER COATED SKID, 450 CFM @ 100 PSIG OR 575 CFM @ 150 PSIG
This product is compatible with the following OEM manufacturers
| OEM Manufacturer | Part # |
|---|---|
| SCHMIDT MANUFACTURING / U.S. FILTER / AXXIOM MANUFACTURING | 1300-041 |
| SCHMIDT MANUFACTURING / U.S. FILTER / AXXIOM MANUFACTURING | ACS 400 |
Forecast Sales is not affiliated with nor is it endorsed by the above manufacturer(s). The product depicted above is not produced or authorized by the above manufacturer(s), with the exception of Forecast Sales/Pirate Brand, RPB Safety, and Bullard.
FEATURES:
- 5 year limited warranty (see warranty documentation for details)
- After cooler (cools incoming air before reaching desiccant)
- Moisture separator
- Coalescing filter
- Air temperature gauge (great for troubleshooting)
- Filter/regulator/lubricator package for air motor
- No electricity required
- Skid mounted
| Specifications | |
| Inlet Size | 2" NPT |
| Outlet Size | 1-1/2" NPT |
| Weight | 297 lb (135 kg) |
| Width | 38" (97 cm) |
| Depth | 22" (56 cm) |
| Height | 46" (117 cm) |
| Max. Pressure | 200 PSI |
| Air Motor Lubricant | ATF |
| Maximim CFM (Cubic Feet Per Minute) | |||||
| 80 PSI | 100 PSI | 125 PSI | 150 PSI | 175 PSI | 200 PSI |
| 330 | 450 | 500 | 575 | 660 | 750 |
HOW IT WORKS
Pirate Brand® Dry Land™ After Coolers are a skid mounted system which includes an after cooler, a moisture filter, and a coalescing filter. Warm air enters the aftercooler where it is cooled to a 10°F to 15°F (5.6°C to 8.3°C) approach to ambient air temperature, water is condensed out during this cooling process. The saturated air and liquid water pass through a moisture separator where airborne water droplets are separated out. Next the air passes through a coalescing filter where any oil contaminants from the compressor are removed before it flows through the after cooler outlet.