APV II ABRASIVE METERING VALVE, 1-1/4",SOLID TUNGSTEN CARBIDE SLEEVE, 1-1/4" NPT BLAST POT CONNECTION, 1-1/4" MALE NPT x 1-1/4" MALE NPT NIPPLE
Contact Us for Additional Information
Write a Review
Write a Review
APV II ABRASIVE METERING VALVE, 1-1/4",SOLID TUNGSTEN CARBIDE SLEEVE, 1-1/4" NPT BLAST POT CONNECTION, 1-1/4" MALE NPT x 1-1/4" MALE NPT NIPPLE
- Part Number:
- 888-2148-007PB
- Weight:
- 13.40 LBS
APV II ABRASIVE METERING VALVE, 1-1/4", SOLID TUNGSTEN CARBIDE SLEEVE, 1-1/4" NPT BLAST POT CONNECTION, 1-1/4" MALE NPT x 1-1/4" MALE NPT NIPPLE
This product is compatible with the following OEM manufacturers
| OEM Manufacturer | Part # |
|---|---|
| SCHMIDT MANUFACTURING / U.S. FILTER/ AXXIOM MANUFACTURING | 2152-007 |
Forecast Sales is not affiliated with nor is it endorsed by the above manufacturer(s). The product depicted above is not produced or authorized by the above manufacturer(s), with the exception of Forecast Sales/Pirate Brand, RPB Safety, and Bullard.
- ABRASIVE ADJUSTMENT INDICATOR (AAI) ALLOWS YOU A VISUAL METHOD OF ADJUSTMENT
- HEXAGON CAST INTO VALVE FOR EASE OF ASSEMBLY AND DISASSEMBLY
- BREATHER HOLE RELOCATED AND FILTER ADDED TO PREVENT ABRASIVE DUST FROM ENTERING CHAMBER
- INCREASED SPRING FORCE FOR QUICKER ACTUATION WHICH IMPROVES SEAL AND SEAT LIFE
- IMPROVED PISTON AND SEAL DESIGN TO INCREASE RELIABILITY AND ENSURE SMOOTH PISTON TRAVEL
- SOLID MACHINED TUNGSTEN CARBIDE/STAINLESS PLUNGER PROVIDES FAR SUPERIOR WEAR RATES 100% CONSISTENT TOLERANCES, AND CORROSION RESISTANCES
- CLEAN OUT PORT 1" NPT W/ STAINLESS PLUG
- QUADRUPLE URETHANE PLUNGER SEAL ARRANGEMENT SOLVES THE AIR & ABRASIVE CARRY OVER PROBLEM AS WELL AS THE PLUNGER AND SLEEVE JAMMING PROBLEM NORMALLY ASSOCIATED WITH REGULATED LOW PRESSURE BLASTING APPLICATIONS AND/OR THE USE OF STEEL ABRASIVE
- SOLID MACHINED TUNGSTEN CARBIDE SLEEVE PROVIDES FAR SUPERIOR WEAR RATES AND 100% CONSISTENT TOLERANCES
- PLUNGER SEAL DESIGN IMPROVED FOR BETTER SEALING AND LONGER LIFE
- ALL PIPE NIPPLES ARE HARDENED TO 55 HRC FOR EXTENDED SERVICE LIFE
- DIE CAST ALUMINUM PARTS ARE ANODIZED AND POWDER COATED FOR A CORROSION RESISTANT AND DURABLE FINISH
- REQUIRES 90 PSI SIGNAL LINE PRESSURE FOR FULL OPEN OPERATION
! APVII COMPONENTS ARE NOT INTERCHANGEABLE WITH SCHMIDT® THOMPSON VALVE II WITH THE EXCEPTION OF THE 2014-300 VENT AND 2148-000-04 PISTON SEAL.
